Operating requirements
▷ Pedestrian warning with braking function is
switched on.
Person warning with light braking function,
see page 222.
▷ Collision warning with braking function is
switched on.
Collision warning with braking function, see
page 214.
▷ The sensors detect adequate space around
the vehicle.
Switching on/off
The system is automatically activated at the start
of each journey.
Warning with avoidance
assistance
Display in the instrument cluster
If there is a risk of collision with a detected vehi‐
cle or person, a warning symbol is shown in the
instrument cluster and in the Head-Up Display.
Symbol Action
Symbol illuminates red: advance
warning.
Brake and increase the distance.
Symbol flashes red and an acoustic
signal sounds: acute warning for ob‐
stacles.
Brake and perform an evasive ma‐
noeuvre if necessary.
Symbol flashes red and an acoustic
signal sounds: acute warning for
people.
Brake and perform an evasive ma‐
noeuvre if necessary.
Acute warning with avoidance
assistance
An acute warning is given when the vehicle is ap‐
proaching another object at a high differential
speed and there is an immediate risk of a colli‐
sion.
The driver must intervene personally when an
acute warning is given. The system provides
support for the driver's evasive manoeuvres if
there is a risk of collision.
An acute warning can be triggered even without
a previous advance warning.
System limits
Safety note
WARNING
The system may not respond at all, or may re‐
spond too late, incorrectly or without justifica‐
tion due to system limitations. There is a risk of
accident or material damage. Observe the in‐
formation on the system limits and intervene
actively if necessary.
Detection range
The detection ability of the system is limited.
Only objects detected by the system are taken
into account.
For this reason, the system may fail to respond
or only respond after a delay.
Seite 218
CONTROLS
Safety
218
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
