EasyManua.ls Logo

BMW 320e - Page 241

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating requirements
The function can be activated at speeds of.
10 km/h, approx. 6 mph to approx. 250 km/h,
approx. 155 mph.
Lane changes to other driving lanes are car‐
ried out at speeds from approximately
70 km/h, 43 mph to approximately 100 km/h,
62 mph.
Lane changes to the hard shoulder are car‐
ried out at speeds from approximately
35 km/h, 22 mph to approximately 40 km/h,
25 mph.
Activating the emergency stop
function
Briefly press the switch for the parking
brake to activate the emergency stop func‐
tion.
With lane change function: when the switch is
released, an automatic lane change is trig‐
gered if necessary.
The system takes over vehicle control for a
maximum of 2 minutes.
The hazard warning lights are switched on.
An emergency call is triggered.
Cancelling the emergency stop
function
At any time during the process, the driver can
cancel the emergency stop function by actively
taking control of the vehicle.
For example, the emergency stop function can
be cancelled in the following situations:
When steering.
On indicating.
When accelerating.
When the hazard warning lights are switched
off.
When the emergency call is cancelled.
When the selector lever position is changed
while at a standstill.
When the driver's foot is still on the accelera‐
tor pedal when the function is triggered.
When the parking brake switch is pressed.
When the vehicle is at a standstill
As soon as the vehicle is at a standstill, the sys‐
tem configures the following settings:
Selector lever position P is engaged.
Parking brake is applied.
Interior light is switched on.
Central locking system is unlocked.
Displays in the instrument
cluster
Symbol Status
Emergency stop function active.
Without lane change function:
Symbol Status
Steering wheel symbol green:
If lane boundaries are detected, the
system keeps the vehicle in the lane.
Steering wheel symbol grey:
Lane tracking interrupted briefly.
Steering wheel symbol yellow:
Lane marking driven over.
If lane boundaries are detected, the
system keeps the vehicle in the lane.
Steering wheel symbol yellow:
Hands are not around the steering
wheel. System remains active.
Seite 241
Safety
CONTROLS
241
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals