EasyManua.ls Logo

BMW 320e - Page 252

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Change speed limit
Press the rocker switch repeatedly up or down
until the desired speed is set.
Each time the rocker switch is pressed to the
resistance point, the speed limit is increased
or decreased by 1 km/h, 1 mph.
Each time the rocker switch is pressed be‐
yond the resistance point, the speed limit
changes to the next multiple of 10 km/h on
the km/h display or the next multiple of 5 mph
on the mph display in the speedometer.
If the set speed limit has been reached or unin‐
tentionally exceeded, for example when driving
downhill, there is no active brake intervention.
If you set a speed during the journey which is be‐
low the current speed, the vehicle rolls to the set
speed limit.
The current speed can also be stored by press‐
ing the button:
Press the button on the steering wheel.
Exceeding the speed limit
The system gives a warning if the travelling
speed exceeds the set speed limit.
You can intentionally exceed the speed limit.
There is no warning in such a case.
To intentionally exceed the set speed limit, press
the accelerator pedal all the way down.
The limit automatically becomes active again as
soon as the current speed falls below the set
speed limit.
Warning when the speed limit is
exceeded
Visual warning
If the speed limit is exceeded: the indica‐
tor lamp in the instrument cluster flashes
for as long as you exceed the set speed
limit.
Acoustic warning
A signal sounds if you inadvertently exceed
the set speed limit.
If the speed limit is reduced to below the
driven speed during the journey, the warning
sounds after a little time.
If you intentionally exceed the speed limit by
fully pressing the accelerator pedal, no warn‐
ing sounds.
Displays in the instrument
cluster
Display in the speedometer
Green marker: system is ac‐
tive.
Grey mark: the system is inter‐
rupted.
No marker: system is switched
off.
Indicator lamp
If the indicator lamp is illuminated: the
system is switched on.
If the indicator lamp is flashing: set
speed limit is exceeded.
Grey indicator lamp: the system is interrup‐
ted.
Seite 252
CONTROLS
Driver Assistance Systems
252
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals