BMW 320e - Page 254

Dynamic Stability Control DSC is switched on, if
necessary.
Switching off
Depending on the equipment, press the
corresponding button on the steering
wheel.
The displays turn off. The stored desired speed
is deleted.
Interrupting Cruise Control
Interrupting manually
Press the button while the system is ac‐
tivated.
Interrupting automatically
The system is interrupted automatically in the
following situations:
▷ If the driver brakes.
▷ Steptronic transmission: if the selector lever
is moved out of selector lever position D.
▷ If Dynamic Traction Control DTC is activated
or Dynamic Stability Control DSC deactiva‐
ted.
▷ If Dynamic Stability Control DSC intervenes.
Setting the speed
Maintaining and saving the speed
While the system is interrupted, press the rocker
switch up or down once.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed on the speedom‐
eter.
Dynamic Stability Control DSC is switched on, if
necessary.
The speed can also be stored by pressing the
button.
Press the button.
Changing the speed
Press the rocker switch repeatedly up or down
until the desired speed is set.
If the system is active, the displayed speed is
stored and the vehicle adjusts to the stored
speed when the road is clear.
▷ Each time the rocker switch is pressed to the
resistance point, the desired speed is in‐
creased or decreased by 1 km/h, 1 mph.
▷ Each time the rocker switch is pressed be‐
yond the resistance point, the desired speed
changes to the next multiple of 10 km/h on
the km/h display or the next multiple of 5 mph
on the mph display in the speedometer.
The maximum speed that can be set de‐
pends on the vehicle and the set characteris‐
tics of the hybrid system.
▷ When the rocker switch is pressed to the re‐
sistance point and then held there: the vehi‐
cle accelerates or decelerates without the
need to press the accelerator pedal.
Seite 254
CONTROLS
Driver Assistance Systems
254
Online Edition for Part no. 01405A1EA53 - X/20