Operating requirements
▷ The vehicle has been parked manually and
objects are detected in front of and behind
the vehicle. The distance to a detected kerb
is at least 15 cm, approx. 6 in.
▷ The vehicle has been parked using the Park
Assistant and an object is detected in front of
the vehicle.
▷ The parking space is at least 0.8 m, 2.6 ft lon‐
ger than the vehicle.
▷ The vehicle has been reverse-bay parked.
Leaving a parking space
1.
Switch on drive-ready state.
2. Steptronic transmission:
When the vehicle is stationary, press the Park
Assist button or engage reverse gear to
switch on Park Assist.
3. Tilt the Controller to the right as applicable
and activate the Park Assistant on the Control
Display: "Park Assist"
4. On the Control Display, confirm the required
direction for leaving the parking space.
5. Steptronic transmission:
The system takes over the manoeuvre. A
message is displayed at the end of the ma‐
noeuvre.
6. Make sure that it is safe to leave the parking
space in the current traffic situation and drive
off as usual.
The Park Assistant is switched off automati‐
cally.
System limits
The system limits of the Park Distance Control
PDC and the Park Assist apply.
With Parking Assistant:
reversing assistant
Principle
The system supports the driver when reversing,
for example when driving out of tight or blind
parking spaces or narrow roads.
The vehicle saves the driving movements for the
last stretch of road. The vehicle can reverse
along this saved stretch with automated steering.
General
The system takes over the steering when revers‐
ing along the saved stretch.
The driver is responsible for operating the accel‐
erator pedal and the brake.
The reversing assistant uses the control func‐
tions and the sensors of the Park Distance Con‐
trol PDC and Park Assist.
For further information:
▷ Park Distance Control, PDC, see page 278.
▷ Park Assistant, see page 286.
Safety notes
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the traffic situa‐
tion correctly. Due to system limitations, it can‐
not respond independently and appropriately in
all traffic conditions. There is a risk of accident.
Adapt your driving style to the traffic conditions.
Observe the traffic situation and intervene ac‐
tively if the situation warrants it.
WARNING
When the trailer tow hitch is in use, the driver
assistance system could cause damage if its
sensors are obstructed. There is a risk of acci‐
dent or material damage. Do not use the driver
Seite 291
Driver Assistance Systems
CONTROLS
291
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
