Switching on/off directly
Principle
The system can be switched on or off in various
ways.
The system switches off automatically after ap‐
prox. 30 minutes.
Using the button
General
If the vehicle is in standby state, the system can
be switched on or off via the buttons of the auto‐
matic air conditioning.
Switching on
Press any button, except:
▷ Rear window heating.
▷ Lower side of air flow button.
▷ Seat heating.
Switching off
Press and hold the down button.
The system switches itself off when you leave
the vehicle.
Via iDrive
The system can be switched on or off using
iDrive.
1.
"CAR"
2. "Settings"
3. "Climate comfort"
4. "Auxiliary climate control"
5. "Start now"
Via vehicle key
The system can be switched on using the vehi‐
cle key.
The stationary air conditioning function must be
set for the button on the vehicle key.
Press the button on the vehicle key.
The system shuts down automatically after ap‐
proximately 30 minutes or by activating the drive-
ready state.
For further information:
For settings, see page 113.
Display
symbol on the automatic air conditioning sig‐
nals that the system is switched on.
Air conditioning for departure
time
Principle
To ensure a pleasant interior temperature in the
vehicle at the start of the journey, it is possible to
set different departure times.
The switch-on time is automatically determined
from the temperature.
Departure time with day of the week: the time
and day of the week can be set.
The system is switched on in good time before
the set departure time on the required days of
the week.
Switch-off takes place automatically a few mi‐
nutes after the set departure time.
Preselection of departure time is done in two
stages:
▷ Set the departure times.
▷ Activate the departure time.
At least 10 minutes should pass between adjust‐
ing/activating the departure time and the sched‐
uled departure time, so the climate control has
enough time to work.
Seite 317
Air conditioning
CONTROLS
317
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
