BMW 320e - Page 323

dock, this may impair card function. There is a
risk of injury and material damage. When charg‐
ing mobile devices, make sure there are no ob‐
jects between the device and the dock.
NOTE
The dock is designed for mobile telephones up
to a certain size. Using excessive force when
inserting the mobile telephone may damage
the dock or the mobile telephone. There is a
risk of material damage. Observe the maximum
dimensions for the mobile telephone. Do not
force the mobile telephone into the dock.
Overview
Tray in the centre console:
1 LED
2 Storage area
Operating requirements
▷ The mobile telephone must support and be
compatible with the required Qi standard.
If the mobile telephone does not support the
Qi standard, the mobile telephone can be
charged using a special Qi-compatible charg‐
ing pad.
▷ Standby state is switched on.
▷ Note the maximum dimensions of the mobile
telephone.
▷ Only use protective sleeves and covers up to
a maximum thickness of 2 mm, 0.07 in, oth‐
erwise the charging function may be im‐
paired.
▷ The mobile telephone to be charged is loca‐
ted in the middle of the dock.
Operation
Inserting the mobile telephone
TThe maximum size for the mobile phone is ap‐
proximately 154.5 x 80 x 18 mm, 6.06 x 3.1 x
0.7 in.
1. Open the cover of the dock.
2. Place the mobile telephone in the centre of
the dock with the display facing upwards.
3. Close the cover of the dock.
Removing the mobile telephone
1.
Open the cover of the dock.
2. Remove the mobile telephone.
LED displays
Col‐
our
Meaning
Blue The mobile telephone is charging.
The blue LED stays illuminated once
the inserted Qi-compatible mobile tel‐
ephone is fully charged.
Or‐
ange
The mobile telephone is not charging.
The mobile phone may be exposed to
excessively high temperatures or there
may be foreign bodies in the charging
dock.
Red The mobile telephone is not charging.
Contact a Service Partner of the manu‐
facturer or another qualified Service
Partner or a specialist workshop.
Seite 323
Interior equipment
CONTROLS
323
Online Edition for Part no. 01405A1EA53 - X/20