Resetting settings
Reset ECO PRO INDIVIDUAL to the default set‐
ting:
"Reset"
HYBRID ECO PRO: route-
ahead assistant
Principle
The function helps to save fuel and supports an
anticipatory driving style. Using the navigation
data, certain sections of the route ahead can be
detected early and information can be shared
with the driver.
General
The recognised sections of the route, such as
built-up areas or bends ahead, for example, re‐
quire a reduction in speed.
The alert is also given if the section of the route
ahead cannot yet be detected when driving.
The alert is shown until the section of the route
is reached.
If an alert is given, vehicle speed can then be re‐
duced in an efficient way by removing your foot
from the accelerator and allowing the vehicle to
roll until the section of road is reached.
Operating requirements
▷ HYBRID ECO PRO driving mode is activated.
▷ The function must be available in the country
in which the vehicle is being driven.
Activating/deactivating
1.
"CAR"
2. "Settings"
3. "Driver assistance"
4. If necessary, "Driving"
5. "Speed Assistant"
6. "Speed limits"
7. Select the desired setting.
For further information:
Speed Limit Assist, see page 264.
Display
Display in the instrument cluster
An alert regarding a section of the route
ahead is given as a recommendation to al‐
low the vehicle to roll.
An additional symbol shows the detected section
of the route:
Symbol Section of the road in front
Speed limit or town entrance.
Junction or turn, exit from a fast
road.
Corner.
Roundabout.
Display in the Head-Up Display
The advance notice alert can also be
shown in the Head-Up Display.
Display on the control display
An alert is shown in the driving style analysis dis‐
play on the Control Display if there is a corre‐
sponding section of the route.
1.
"CAR"
2. "Driving information"
3. "Driving style analysis"
Seite 352
DRIVING HINTS
Saving fuel
352
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
