4. "Reset journey data"
5. Select the desired setting.
Speed warning
Principle
The system can be used to set a speed limit
which triggers a warning when it is exceeded.
General
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below 5 km/h/3 mph.
Adjusting
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Warning at:"
6. Turn the Controller until the desired speed is
displayed.
7. Press the Controller.
Activating/deactivating
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Speed warning"
Setting the current speed as the
speed warning
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Select current speed"
Activating/deactivating
information windows
Information windows are automatically shown on
the Control Display for some functions. Some of
these information windows can be activated or
deactivated.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Pop-ups"
5. Select the desired setting.
The setting is saved for the current driver profile.
Control display
Brightness
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
6. Press the Controller.
7. Turn the Controller until the desired bright‐
ness is obtained.
8. Press the Controller.
The setting is saved for the current driver profile.
Depending on the lighting conditions, the bright‐
ness adjustment may not be immediately appa‐
rent.
Seite 77
General settings
CONTROLS
77
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
