EasyManua.ls Logo

BMW 320e - Page 88

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ambient temperature too high or too low to
operate the mobile telephone.
Do not subject the mobile telephone to ex‐
treme ambient conditions.
Why can telephone functions not be operated via
iDrive?
No telephone functions are configured for the
mobile telephone.
Connect the mobile telephone with the tele‐
phone function.
Why are no phone book entries, not all entries or
incomplete entries displayed?
The transfer of the phone book entries is not
yet completed.
Under certain circumstances only the phone
book entries saved in the mobile telephone or
on the SIM card are transferred.
It may not be possible to display phone book
entries containing special characters.
It may not be possible to transfer contacts
from social networks.
The number of phone book entries to be
transferred is too high.
The data volume of the contact is too large,
for example due to saved information such as
memos.
Reduce the data volume of the contact.
A mobile telephone can only be connected as
an audio source or as a telephone.
Configure the mobile telephone and connect
it to the telephone function.
A contact was created in the telephone con‐
tact list after the last synchronisation.
Re-synchronise the contacts: "Reload
contacts"
How can the telephone connection quality be
improved?
Adjust the strength of the Bluetooth signal on
the mobile telephone; the procedure varies
from mobile telephone to mobile telephone.
Insert the mobile telephone in the wireless
charging dock.
Adjust the volume of the microphone sepa‐
rately in the sound settings.
If all the points on the list have been reviewed
and the desired function cannot be performed,
contact the Hotline, a Service Partner of the
manufacturer or another qualified Service Partner
or a specialist workshop.
WLAN connection
General
For certain applications, for example apps, data is
exchanged between the vehicle and a smart‐
phone via WLAN.
Operating requirements
Standby state is switched on.
Compatible device with activated WLAN in‐
terface.
Activating WLAN in the vehicle
1.
"COM"
2. "Mobile devices"
3. Tilt the Controller to the right.
4. "Settings"
5. "Wi-Fi"
Wi-Fi hotspot
Principle
Compatible devices with a WLAN interface can
use the vehicle's Internet connection via the Wi-
Fi hotspot.
General
Up to ten devices can be connected at the same
time using the Wi-Fi hotspot.
Seite 88
CONTROLS
Connections
88
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals