47
Seat and mirror memory*
You can memorise and call up three dif-
ferent driver's-seat and outside-mirror
position settings.
The setting for the lumbar support
is not stored in memory.<
Memorising
1. Ignition key in position 1 or 2
2. Select a seat and outside-mirror
position
3. Press the M
EMORY button: the telltale
light in the switch comes on
4. Press memory button 1, 2 or 3: the
telltale light goes out.
Calling up
Do not call up a memorised set-
ting while driving, as an unex-
pected seat movement could represent
an accident risk.<
Ignition key position 1:
> Press the appropriate memory button
1, 2 or 3 briefly.
The adjusting movement is inter-
rupted immediately if a seat position
adjustment switch or one of the
memory buttons is pressed.
With the driver's door closed and the
ignition key either removed or in posi-
tion 0 or 2:
> Press memory button 1, 2 or 3 until
the adjusting procedure has been
completed.
If the M
EMORY button was pressed acci-
dentally: press the button a second
time; the telltale light will go out.
You can have your car pro-
grammed to ensure that your pre-
ferred seat and outside-mirror positions
are selected whenever you unlock the
car with your own personal remote con-
trol key.<
When this setting is used, make
sure that the footwell behind the
driver's seat is clear. Otherwise per-
sons or animals could be injured or
damage could be caused by the seat if
it moves backwards.<
OverviewControlsMaintenanceMinor repairsDataKeywords
Online Edition for Part-No. 01 41 0 158 017 - © 03/04 BMW AG
To Next Page
Loading...
