37
E46iCCVM/ST039/3/21/00
Service Adjustments
The convertible top storage compartment cover is made of magnesium, a spacer plate
must be used when installing the cover to the mounting brackets. the brackets have elon-
gated holes for adjustment of the cover to the body.
The height of the rear of the storage compartment cover is adjusted at the mounting brack-
ets for the hydraulic cylinders located in the trunk. This adjustment must be carried out by
removing the rear tail light assemblies due to the lock out of the trunk lid and storage cover.
ART-SHIM.
ART-ANTEMP
To Next Page
Loading...
