To Next PageTo Next Page
Need help?Do you have a question about the BMW E46 Convertible 2000 and is the answer not in the manual?
General| Brand | BMW |
|---|---|
| Model | E46 Convertible 2000 |
| Category | Automobile |
| Language | English |
Explains the system's function and lists key operational features.
Details the construction and layers of the convertible top frame.
Describes the processing, controlling, and monitoring electronics for the convertible top.
Details the hydraulic unit, its components, and operating pressure.
Explains the function and location of hydraulic cylinders for various top mechanisms.
Describes the function and location of solenoids controlling hydraulic cylinder operation.
Details the motor responsible for locking and unlocking the storage compartment cover.
Explains the lock assembly for securing the windshield frame to the top.
Describes the switch in the center console used for top operation.
Overview of sensors and switches providing feedback for top positioning and sequencing.
Details hall sensors that detect the locked status and raised position of the top frame.
Explains hall sensors that detect the locked/unlocked position of the storage compartment cover.
Describes the hall sensor for storage cover positioning and switching operation.
Details the hall sensor on the motor that signals locked/unlocked status of the storage cover.
Explains the hall sensor used to lock out soft top operation when the hard top is installed.
Describes the angle sensor determining the position of the tension bow.
Details the angle sensor used for main pillar positioning during top operation.
Explains the micro-switch that locks out top operation when the compartment floor is raised.
Lists conditions that must be met before the soft top can operate.
Details the steps involved when the top is operated to lower it.
Details the steps involved when the top is operated to raise it.
Explains how hydraulic fluid pressure and solenoids control cylinder movement.
Describes the manual procedure for locking/unlocking the storage cover.
Explains comfort operation via door lock cylinder or remote key.
Details how to finish top operation at speeds above 2 MPH.
Describes how the system holds position and pressure in intermediate states.
Explains the NVRAM fault memory and storage capacity.
Describes how the system behaves when faults occur and troubleshooting steps.
Details the electrically operated storage cover lock system for the manual top.
Describes how the accessory hard top attaches to the vehicle at four locations.
Covers highlights of soft top removal and installation procedures.
Details adjustments for the storage compartment cover to the body.
Outlines the goals of the Roll Over Protection System module.
Explains the system's function as a passive safety system.
Describes the aluminum cassettes that house the deployable roll bars.
Details the sensor that detects rollover conditions and triggers bar deployment.
Explains the clinometer's role in detecting tilting and acceleration for deployment.
Describes the G-sensor's function in triggering roll bars during airborne conditions.
Outlines procedures for diagnosing and testing the Roll Over Sensor.
