39
E46iCCVM/ST039/3/21/00
Review Questions
1. What are the major changes to the E46iC fully automatic top operation compared to the
E36iC?
2. How many hydraulic solenoids are used in the operation of the E46iC top?
3. The locking/unlocking function of the storage compartment cover is controlled by which
module?
4. Which hall sensors control the flashing of the LED in the top switch?
5. What happens to the soft top/frame if the ignition is switched off during its operation?
6. Describe the emergency closing procedure for the soft top:
7. What type of input is provided by the angle hall sensors for top operation?
8. The only micro switch used in the operation of the soft top is?
9. What indication is shown if the variable compartment floor is open when the top switch
is pressed?
To Next Page
Loading...
