Mobility
199
Reference OverviewControlsDriving hintsCommunication NavigationEntertainment
1 Tail light/rear fog light and second brake
light
2 Flashing turn indicator
3 Reflector
4 Reversing light
5 Parking/tail light and brake light
Rear lights with xenon headlights
> Flashing turn indicators:
PY21W bulb, 21 watts
> Reversing lights:
W16W bulb, 16 watts
> Brake lights/rear fog light:
P21W bulb, 21 watts
1 Rear fog light and second brake light
2 Flashing turn indicator
3 Reflector, parking and tail light LED
4 Reversing light
5 Brake light
Replacing rear lights
All bulbs are grouped together in a central bulb
holder.
1. If applicable, remove the cover
*
of the first-
aid pouch and the warning triangle, see
page 204.
2. Remove the cover from the side panel of the
luggage area.
3. Unfasten the bulb fitting by pressing down
the clip, see arrow, and remove by twisting
towards the centre of the vehicle.
4. Press the bulb in slightly and turn to the left,
take out and change it.
5. Reattach the bulb holder so that it clicks
into place.
6. Install the covers.
In the case of xenon headlights, the park-
ing/tail light uses LED technology. After
replacing the bulb, ensure that the bulb fitting
has correctly snapped into place, as otherwise
the parking/tail light might not function.<
Licence plate lights and centre brake
light
These lights use LED technology. In the event
of a fault, please contact BMW Service or a
workshop that operates to BMW specifications
and has suitably trained personnel.
Repairing a puncture
Safety precautions in the event of a punc-
ture:
Park the vehicle as far away as possible from
traffic and on solid ground. Switch on the haz-
ard warning flashers.
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
To Next Page
Loading...
