Maintenance overview
228
Body:
Check for corrosion, excluding cavities
++
Tyres:
Check tread depth, running pattern, external condition and
inflation pressure; correct inflation pressure if necessary
+ +
Initialising the Run Flat Indicator
++
BMW Mobility System
*
:
Check the expiry date on the sealant cylinder.
Replace the sealant cylinder if necessary, for a separate charge
+ +
Battery:
Check the battery.
Charge if necessary, for a separate charge
++
Steering oil container
*
:
Check oil level, top up if necessary for a separate charge
+ +
Steering components:
Check clearance, leak-tightness
*
, damage and wear
++
Check the coolant level and concentration, top up if necessary
+ +
Windscreen washing unit:
Check fluid level, top up if necessary; if required with addition of
anti-freeze for a separate charge
++
Brake lines and connections:
Check for leak-tightness, damage and correct position
+ +
Underbody, including all visible parts:
Check for damage, corrosion, leak-tightness, including leak-
tightness of shock absorbers and fitting (rebound - compres-
sion)
++
Check of road safety, test drive:
> Brakes
> Steering
> Shock absorbers
> Gearbox
+ +
Reset service display in line with workshop guideline
++
Maintenance work Petrol Diesel
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
To Next Page
