Activating engine speed
warning
Switch on ignition ( 38).
Press and hold button 1 and
button 2 simultaneously until
display changes.
FLASH (engine speed warn-
ing indicator) and ON or OFF
are shown.
Press button 1 until desired
state is shown.
ON: engine speed warning acti-
vated.
OFF: engine speed warning
deactivated.
To save the setting made,
press and hold button 1 and
button 2 simultaneously until
the display changes.
Off-road riding
After driving offroad
BMW Motorrad recommends
that the following be observed
after driving offroad:
Tire inflation pressure
WARNING
When riding off-road, re-
duced tyre pressure when
riding on paved surfaces.
Risk of accident due to poorer
driving characteristics.
Ensure proper tyre inflation
pressure.
Brakes
WARNING
Riding on unpaved or dirty
roads.
Delayed braking effect caused by
dirty brake discs and brake pads.
Brake early until the brakes are
braked clean.
ATTENTION
Riding on unpaved or dirty
roads.
Increased brake pad wear.
Check the brake pad thickness
more often and replace the
brake pads sooner.
Spring preload and damping
WARNING
Modified values for spring
preload and spring strut
6
79
z
Riding
ProCarManuals.com
To Next Page
Loading...
Need help?
General
