BMW F 800 R User Manual

when the ignition is temporarily
switched off.
Operating stopwatch
If necessary, switch over from
odometer to stopwatch with
button 1.
With stopwatch stopped, press
button 2 to start stopwatch.
With stopwatch running, press
button 2 to stop stopwatch.
Press and hold button 2 to re-
set stopwatch.
Laptimer
To enable improved operation of
the stopwatch while riding (as a
Laptimer), the functions of the
INFO 1 button and the functions
of the 2 button can be inter-
changed. The stopwatch and
the trip odometer are then op-
erated using INFO 1 button; the
onboard computer must be oper-
ated using the 2 button.
Interchanging button
functions
Switching on ignition ( 42).
Press and hold button 1 and
button 2 simultaneously until
display changes.
FLASH (engine speed warn-
ing indicator) and ON or OFF
are shown.
Press button 2.
LAP (Laptimer) and ON or
OFF are shown.
Press button 1 repeatedly until
desired state is shown.
ON: stop watch is operated
by INFO button on left-hand
multifunction switch.
4
49
z Operation

BMW F 800 R Specifications

General

Engine Type	Liquid-cooled, 4-stroke parallel twin
Displacement	798 cc
Power	90 hp (66 kW) @ 8, 000 rpm
Transmission	6-speed
ABS	Standard
Fuel System	Electronic fuel injection
Torque	86 Nm (63 lb-ft) @ 5, 800 rpm
Front Suspension	43 mm telescopic fork
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, single-piston caliper
Fuel Capacity	16 l
Dry Weight	177 kg
Rear Suspension	Double-sided swing arm, central spring strut, spring preload adjustable