Reason for an alarm
Once you have deactivated the
alarm function, the DWA LED
indicates the reason for potential
alarm activation for one minute:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorised vehicle
key
Flashes 4x: Disconnection of
the anti-theft alarm from the
motorcycle's battery
Flashes 5x: Motion sensor 3
Deactivation
with anti-theft alarm (DWA)
OE
Deactivating the alarm
function
Switch on using an authorised
ignition key.
with Keyless Ride
OE
Press button 1 on the radio-
operated key once.
NOTICE
The alarm function is reactivated
after 30 seconds if "activation
after ignition off" has been selec-
ted if the alarm function is deac-
tivated using the radio-operated
key and the ignition is not then
switched on.
Turn indicators flash once.
Alarm tone sounds once (if so
programmed).
Alarm function is deactivated.
Programming
with anti-theft alarm (DWA)
OE
Programming options
The alarm system can be adap-
ted to your particular needs in
the following respects by your
authorised BMW Motorrad Re-
tailer:
Confirmation alarm tone after
having activated/deactivated
the DWA in addition to flashing
turn indicators.
Rising and falling or intermittent
alarm tone.
with Connectivity
OE
The alarm system can be
adjusted in the Settings,
Vehicle settings, Alarm
system menu.
6
153
z
Anti-theft alarm
https://www.motorcycle-manual.com/