BMW F02 - Usb;Audio Interface Components

“USB/audio interface” Components
“USB/audio interface” consists of the following components:
• Interface box High (ULF-SBX-High)
• USB hub
• Audio socket with USB interface
• Application software in the head unit
The USB interface is on the center console and is protected by a sliding cover.
Simultaneous use of the USB interface and the 12 V socket for charging the mass
storage device is not recommended.
Depending on the USB lead used, the mass storage device may be able to be charged
through the USB interface. However, the power consumption of the mass storage device
must not exceed the maximum level of 500 mA permitted by the SBX High.
The (SBX High) interface box is capable of performing the following tasks:
• USB connection for USB/audio interface
• Bluetooth interface with hands-free mode and phone book
• Basic voice input and activation system through the telephone
ULF-SBX High connections
Index Explanation Index Explanation
1
Bluetooth connection (Not in US)
3
MOST connection
2
54-pin connector
4
USB connection
96
F01 Audio Systems