EasyManua.ls Logo

BMW G01 - Page 26

BMW G01
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G01�General�Vehicle�Electronics
2.�Interior�Lighting
22
Index Explanation
36 Lighting,�rear�left�seat
37 Footwell�light,�rear�right
38 Footwell�light,�rear�left
39 Lighting,�rear�right�seat
40 Interior�light,�rear�(in�vehicles�without�panorama�glass�roof)
41 Interior�light,�rear�left�(on�vehicles�with�panorama�glass�roof)
RGB�(Red,�Green,�Blue)�LED�modules�are�used�for�the�ambient�lighting.
The�lighting�for�the�ambient�interior�lighting�is�controlled�via�a�separate�LIN�bus.�The�individual�LED
modules�are�connected�via�a�local�interconnect�network�bus.�The�LED�modules�are�connected�in
series�to�the�LIN�bus�around�the�vehicle.
If�the�LIN�bus�is�interrupted�at�a�certain�point�or�the�micro�controller�on�the�LED�is�faulty,�then�further
light�transmittance�is�interrupted�at�this�point.�A�search�for�the�fault�must�be�carried�out�at�the�location
where�the�last�LED�illuminates.

Related product manuals