Switch off any functions that are
not currently needed
Functions such as the rear window defroster re‐
quire a lot of energy and reduce the range, espe‐
cially in city and stop-and-go traffic.
Switch off these functions if they are not needed.
The ECO PRO and ECO PRO+ driving modes
support the energy-conserving use of comfort
features. They automatically perform a partial or
complete deactivation of these functions.
Have maintenance carried out
Have the vehicle maintained regularly to achieve
optimal vehicle efficiency and service life. BMW
recommends that maintenance work be per‐
formed by a BMW dealer’s service center.
For information on the BMW Maintenance Sys‐
tem, refer to page 249.
ECO PRO and ECO PRO+
Concept
ECO PRO and ECO PRO+ support an efficient
driving style. To this end, the control of the drive
is optimized for moderate acceleration, and
adapted to lighting and comfort features, such as
climate control output. Some vehicle functions
cannot be used during activated driving mode
ECO PRO and ECO PRO+.
In addition, context-sensitive instructions are dis‐
played to assist with an optimized fuel consump‐
tion driving style.
General information
ECO PRO mode and ECO PRO+ mode each
have different settings.
ECO PRO
▷ Reduction of the heating output and switch-
on duration for exterior mirror, rear window,
and seat heating.
▷ Reduction of the cooling or heating output of
the air conditioner.
▷ The speed is limited to an adjustable maxi‐
mum value between 50 mph/80 km/h and
80 mph/130 km/h. To intentionally exceed
the speed limit, press the accelerator pedal all
the way down.
ECO PRO+
The cooling and heating output of the air condi‐
tioner are additionally deactivated on ECO PRO+
activation.
The low beams are dimmed.
The maximum speed is limited to
55 mph/90 km/h. In special situations, the speed
limit can be consciously exceeded by applying
the accelerator pedal.
Activating ECO PRO and ECO PRO+
Press the button repeatedly, until ECO
PRO or ECO PRO+ is displayed in the
instrument cluster.
Configuring ECO PRO
Via the Driving Dynamics Control
1.
Activate ECO PRO.
2. "Configure ECO PRO"
3. Select the desired setting.
Via iDrive
1.
"My Vehicle"
2. "Vehicle settings"
3. "Configure ECO PRO"
4. Select the desired setting.
Settings are stored for the profile currently used.
Seite 205
Increasing the range
DRIVING TIPS
205
Online Edition for Part no. 01402989267 - II/18
To Next Page
Loading...
