Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion sensor
can trigger an alarm, although no unauthorized
action occurred.
Possible situations for an unwanted alarm:
▷ In automatic vehicle washes.
▷ In duplex garages.
▷ During transport on trains carrying vehicles, at
sea or on a trailer.
▷ With animals in the vehicle.
▷ At the gas station: if the vehicle is locked after
refueling starts.
The tilt alarm sensor and the interior motion sen‐
sor can be switched off in such situations.
Switching off the tilt alarm sensor and
interior motion sensor
Press the remote control button again
within 10 seconds as soon as the vehicle is
locked.
The indicator light lights up for approx. 2 sec‐
onds and then continues to flash.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.
Switching off the alarm
▷ Unlock the vehicle with the remote control or
establish radio-ready state, if needed through
emergency detection of remote control, refer
to page 73.
▷ With Comfort Access:
If you are carrying the remote control on your
person, grasp the door handle on the driver's
or front passenger door completely.
Power windows
Safety information
WARNING
When operating the windows, body parts and
objects can be jammed. There is a risk of injury
or risk of damage to property. Make sure that
the area of movement of the windows is clear
during opening and closing.
Overview
Power windows
Opening
▷
Press the switch to the resistance point.
The window opens while the switch is being
held.
▷
Press the switch beyond the resistance
point.
The window opens automatically. Pressing
the switch again stops the motion.
Convenient opening via the remote control, refer
to page 71.
Closing
▷
Pull the switch to the resistance point.
Seite 84
CONTROLS
Opening and closing
84
Online Edition for Part no. 01402989267 - II/18
To Next Page
Loading...
