To Next Page
E
Eric ShannonJul 26, 2025
What to do if fluid level in BMW Integral ABS is too low and alternate flashing at 1 Hz?
- LljonesJul 26, 2025
If the fluid level in your BMW Motorcycle Integral ABS is too low and the indicator is flashing alternately at 1 Hz, inspect the motorcycle. First, with the ignition OFF, check if the brake pressure is OK at the brake levers. Then, verify that the brakes are acting on both wheels. Finally, check the brake system for leaks. If any of these checks fail, the brake system is defective.
General
