BMW K 1600 GTL Exclusive User Manual

Lift front wheel and install
quick-release axle 3 with
torque.
Quick-release axle in
threaded bush (wheel
carrier)
37 lb/ft (50 Nm)
Tighten the right-hand axle
clamping screw 2 with the
specified torque.
Clamping screw for
quick-release axle to
wheel carrier
14 lb/ft (19 Nm)
Remove front wheel stand.
Insert ABS sensor into hole
and install screw 1.
Slide the brake calipers onto
the brake rotors.
Install securing screws 3 on left
and right with specified torque.
Front brake caliper on
wheel carrier
22 lb/ft (30 Nm)
8
122
z Maintenance

BMW K 1600 GTL Exclusive Specifications

General

Displacement	1649 cc
Rear Suspension	BMW Motorrad Paralever
Rear Brakes	Single 320 mm disc, 2-piston caliper
Tire Front	120/70 ZR 17
Tire Rear	190/55 ZR 17
Engine Type	Liquid-cooled, 4-stroke in-line six-cylinder
Power	160 hp at 7750 rpm
Torque	175 Nm at 5250 rpm
Transmission	6-speed
Fuel Capacity	26.5 liters
Seat Height	750 mm
Weight	364 kg (unladen weight, road ready, fully fueled)
Front Suspension	BMW Motorrad Duolever
Front Brakes	Dual 320 mm discs, 4-piston calipers
Length	2489 mm
Width	1000 mm
Wheelbase	1, 618 mm
Height	1, 465 mm