Maintenance
6
90
short ride will lead to misinter-
pretation; this, in turn, means
that the engine will be operat-
ed with the incorrect quantity
of oil.
In order to ensure that the en-
gine oil level is read correctly,
check the oil level only after a
lengthy trip.c
• Make sure the engine is at
operating temperature and
hold the motorcycle upright
or place it on the centre
stand, after ensuring that the
ground is level and firm.
• Allow the engine to idle for
one minute.
• Switch off the ignition.
• Read off the oil level.
1 Indicator for engine-oil
level
• Check the oil level in oil-level
indicator 1.
2 Maximum engine oil level
3 Minimum engine oil level
The oil level must be between
the MIN and MAX marks. The
difference is approx. 0.5 litres.
If the oil level is below the
MIN mark:
• Top up the engine oil.
If the oil level is above the
MAX mark:
• Correct the level by draining
off some of the engine oil.
Damage to the engine
can result if it is operated
without enough oil, but the
same also applies if the oil lev-
el is too high. Always make
sure that the oil level is
correct.c