To Next PageTo Next Page
Need help?Do you have a question about the BMW R 1100 S and is the answer not in the manual?
General| Displacement | 1085 cc |
|---|---|
| Bore x Stroke | 99 mm x 70.5 mm |
| Compression Ratio | 10.3:1 |
| Transmission | 5-speed |
| Final Drive | Shaft drive |
| Fuel System | Electronic fuel injection |
| Rear Brakes | Single 276 mm disc, 2-piston caliper |
| Front Tyre | 120/70 ZR 17 |
| Rear Tyre | 170/60 ZR 17 |
| Wheelbase | 1, 478 mm |
| Fuel Capacity | 18 liters |
| Engine Type | Air/oil-cooled, 4-stroke, flat twin |
| Power | 98 hp @ 7, 500 rpm |
| Front Suspension | Telelever |
| Rear Suspension | Paralever |
| Seat Height | 810 mm |
| Front Brakes | Dual 305 mm discs, 4-piston calipers |
Explains symbols indicating potential injury or danger.
Explains symbols for preventing motorcycle damage.
Explains symbols for specific operational instructions.
Ensures safety and liability for spare parts and accessories.
Details service and inspection intervals based on mileage.
Covers maintenance items based on time elapsed.
Electrical safety and necessary DIY skills for maintenance.
Policy on technical modifications and importance of genuine parts.
Step-by-step guide for installing and detaching the stand.
Procedure for safely positioning the motorcycle on the stand.
Steps to safely remove the motorcycle from the stand.
Common causes and remedies for engine starting difficulties.
Detailed instructions for safely removing the front wheel.
Detailed instructions for safely installing the front wheel.
Detailed instructions for safely removing the rear wheel.
Visual inspection for wear on front brake pads.
Visual inspection for wear on rear brake pads.
Steps to detach the left and right side panels.
Procedure for setting the headlight beam for riding conditions.
Procedures for high and low beam headlight bulb replacement.
Steps for replacing turn indicator and rear/brake light bulbs.
Instructions for parking and number plate light bulb changes.
Diagram and list of equipment connected to each fuse.
Step-by-step guide for replacing fuses.
Detailed steps for replacing the air filter element.
Warnings and advice for safe battery handling.
Instructions for battery maintenance during long-term storage.
Step-by-step guide for safely removing the motorcycle battery.
Step-by-step guide for safely installing the motorcycle battery.
Guidelines for safe and effective motorcycle cleaning and washing.
Methods for removing road salt and maintaining chromed components.
Guidance on repairing minor paint damage.
Steps to prepare the motorcycle for storage.
Procedures for bringing the motorcycle back into service.
Details on engine configuration, capacity, and maximum output.
Specifications for torque, speeds, fuel consumption, and mixture.
Information on clutch type and gearbox ratios.
Details on the secondary drive and final drive ratio.
Details on frame, wheel placement, and brake system specifications.
Suspension components, tyre pressures, and wheel/tyre sizes.
Recommended engine oil types, classifications, and capacity.
Specifications for gearbox oil, final drive, and fuel grade.
Required type and recommendation for brake fluid.
Specifications for battery, spark plugs, and fuse ratings.
Details on headlights, bulbs, alternator, and starter motor.
Measurements for length, width, height, and seat height.
Unladen, dry, gross weights, payload, and wheel loads.
Data on top speed and acceleration (flexibility).
Metrics for power-to-weight, noise levels, and drag coefficient.
