Need help?Do you have a question about the BMW R 1100 RS and is the answer not in the manual?
General| Displacement | 1085 cc |
|---|---|
| Transmission | 5-speed |
| Final Drive | Shaft drive |
| Engine Type | Air/oil-cooled flat twin (boxer) |
| Power | 66 kW (90 hp) at 7, 250 rpm |
| Torque | 95 Nm at 5500 rpm |
| Front Suspension | Telelever |
| Rear Suspension | Paralever |
| Front Brakes | Dual disc |
| Rear Brakes | Single disc |
| Fuel Capacity | 22 liters |
| Seat Height | 800 mm |
| Wheelbase | 1471 mm |
Schedule for routine maintenance tasks based on mileage and time intervals.
Procedure for draining and replacing engine oil and filter.
Procedures for checking and servicing brake pads, discs, and fluid.
Detailed specifications for engine components including valves, camshaft, and crankshaft.
Specifications for front fork, rear wheel drive, brakes, and wheels.
Critical torque values for engine, chassis, and electrical components.
Torque specifications for cylinder head, crankshaft, and other engine components.
Procedure for checking and adjusting valve clearances.
Procedure for synchronizing throttle bodies and adjusting idle speed.
Procedures for removing, installing, and servicing telescopic fork and suspension strut.
Procedures for removing, dismantling, and installing the rear wheel drive.
Procedures for removing, installing, and servicing brake system components.
Procedures for removing and installing handlebar fittings and controls.
Procedures for removing and installing fairing sections, windshield, and panels.
Procedures for removing and installing frame sections and mounts.
Procedures for removing and installing the center stand.
Procedures for removing and installing the central electrical equipment box.
Details on frame and model-specific wiring harness routing and connections.
Procedures for removing, installing, and dismantling the instrument cluster.
Procedures for removing, installing, and adjusting headlights.
To Next Page
