Need help?Do you have a question about the BMW R 850/1100 R and is the answer not in the manual?
General| Displacement | 848 cc (R 850 R) / 1085 cc (R 1100 R) |
|---|---|
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Brakes | Dual 305 mm discs, 4-piston calipers |
| Rear Brakes | Single 276 mm disc, two-piston caliper |
| Seat Height | 800 mm |
| Weight | 235 kg (R 1100 R) |
| Dry Weight | 210 kg (R 850 R) |
Specifies torque values for engine components on R 1100 RS and R 1100 RT models.
Lists lubricants, sealants, adhesives, cleaners, and testing agents.
Procedure for changing engine oil and replacing the oil filter element.
Procedure for inspecting brake pads and discs for wear and replacing them.
Instructions for bleeding and renewing brake fluid using handbrake lever or brake pedal.
Technical specifications for the engine, including bore, stroke, and power output.
Procedure for removing the engine from the motorcycle.
Steps for dismantling the engine.
Information and procedures related to the starter motor.
Information and procedures related to the alternator.
Details on spark plug specifications and replacement.
Instructions for replacing the fuel filter.
Procedure for removing and installing the air cleaner.
Technical specifications for the clutch.
Steps for checking and adjusting the clutch operating clearance.
Procedure for removing and installing the leading link.
Steps for removing and installing the front suspension strut.
Procedure for removing and installing the steering damper.
Procedure for removing the crown wheel from the rear wheel drive.
Steps for checking and adjusting the backlash in the rear wheel drive.
Procedure for checking the tooth contact pattern.
Procedure for removing and installing the rear ABS sensor.
Procedure for removing and installing the front brake caliper.
Procedure for removing and installing the rear brake caliper.
Procedure for checking and adjusting the ABS sensor gap.
Steps for removing and installing the auxiliary frame.
Procedure for removing and installing the motorcycle frame.
Procedure for removing and installing the side stand.
Procedure for removing and installing the front wheel.
Steps for removing and installing wheel bearings.
Procedure for static balancing of front and rear wheels.
Procedure for removing and installing the central electrical equipment box.
Diagram showing relay and fuse positions in the central electrical equipment box.
Details on the ABS frame wiring harness connections.
Procedure for removing and installing the instrument cluster on RT models.
Procedure for removing and installing the instrument cluster on RS models.
Procedure for removing and installing the instrument cluster on GS models.
Procedure for removing and installing the headlight on RT models.
Procedure for removing and installing the headlight on RS models.
Procedure for removing and installing the front flashing turn indicator.
To Next Page
