Need help?Do you have a question about the BMW R 850 C and is the answer not in the manual?
General| Brand | BMW |
|---|---|
| Model | R 850 C |
| Category | Motorcycle |
| Language | English |
Provides a schedule for regular maintenance tasks based on mileage and time intervals.
Details the checks required before a motorcycle is delivered to the customer.
Procedure for changing engine oil and replacing the oil filter element.
Guidelines for checking and topping up brake fluid levels for front and rear brakes.
Instructions for checking and adjusting valve clearances with the engine cold.
Details the final checks for road safety, including lights, brakes, and steering.
Steps for safely removing the engine from the motorcycle.
Detailed procedure for disassembling the engine into its component parts.
Instructions for reassembling the engine, including torques and sequences.
Procedure for removing and installing the alternator unit and Poly-V belt.
Steps for removing and installing the starter motor.
Procedure for setting and verifying the engine ignition timing.
Instructions for removing and installing the fuel tank.
Procedure for replacing the fuel filter, pump, and level sensor assembly.
Instructions for removing and installing the fuel tank.
Procedure for removing and installing the fuel filter, pump, and level sensor assembly.
General procedure for removing and installing the exhaust system components.
Steps for removing and installing the clutch assembly.
Procedure for filling and bleeding the hydraulic clutch line.
Detailed steps for removing the gearbox from the motorcycle.
Procedure for dismantling the gearbox into its main components.
Instructions for reassembling the gearbox shafts and housing.
Procedure for removing and installing the front telescopic fork.
Steps for removing and installing the leading link assembly.
Procedure for removing and installing the front suspension strut.
Steps for removing and installing the left handlebar controls and fittings.
Steps for removing and installing the right handlebar controls and fittings.
Procedure for removing and installing the main handlebar assembly.
Procedure for removing the rear wheel drive assembly.
Steps for installing the input bevel pinion.
Procedure for assembling and installing the crown wheel.
Steps for removing and installing the rear swinging fork.
Procedure for removing and installing the front brake caliper.
Procedure for removing and installing the rear brake caliper.
Steps for removing and installing the front ABS sensor.
Procedure for checking and adjusting the rear ABS sensor gap.
Instructions for removing and installing the front and rear brake lines.
Steps for removing and installing the front wheel.
Procedure for removing and installing wheel bearings.
Instructions for performing static balancing of the wheels.
Steps for removing and installing the front frame section.
Procedure for removing and installing the rear frame section.
Method for measuring and calculating the wheel track offset.
Procedure for removing and installing the ignition switch and steering lock.
Steps for removing and installing the fuel tank filler cap lock barrel.
Procedure for removing and installing the seat assembly.
Steps for removing and installing the central electrical equipment box.
Information on the frame wiring harness routing and connections.
Procedure for removing and installing the instrument cluster.
Steps for removing and installing the headlight assembly.
Instructions for adjusting the headlight beam angle.
To Next Page
