To Next Page

To Previous Page

Maintenance and care

e Attention:

When removing, avoid damage

to brake pipes, brake discs,

brake pads or the wheel rim

(mask off with tape if neces-

sary).

Keep dirt and moisture away

from the wheel bearings.

Important for BMW Integral

ABS

: do not damage the ABS

sensor cable, ABS sensor ring

or sensor.

Optional extra

L Note:

Mark the installed position on

the tyre and ABS sensor ring;

note also the direction of rota-

tion arrow if it is marked on the

tyre.

• On a firm, level surface, place

the motorcycle on its main

(centre) stand

(Rider's

Manual

b Chapter 3) or on

the auxiliary stand (

b 18-21)

d Warning:

Apply weight to the rear of the

motorcycle so that it cannot

tip forward.

Removing the front wheel

20sbkg7.book Seite 24 Mittwoch, 2. Juni 2004 8:58 08

Other manuals for BMW R 1100 S

Questions and Answers:

Need help?

Do you have a question about the BMW R 1100 S and is the answer not in the manual?

General

Displacement	1085 cc
Bore x Stroke	99 mm x 70.5 mm
Compression Ratio	10.3:1
Transmission	5-speed
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Rear Brakes	Single 276 mm disc, 2-piston caliper
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Wheelbase	1, 478 mm
Fuel Capacity	18 liters
Engine Type	Air/oil-cooled, 4-stroke, flat twin
Power	98 hp @ 7, 500 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Seat Height	810 mm
Front Brakes	Dual 305 mm discs, 4-piston calipers