160n
Lamps and bulbs
License plate lamps
5 watt bulb
1 Insert a screwdriver into the slot and
press to the left (arrow); this disen-
gages the lamp.
2 Remove the lamp and replace the
bulb.
394de642
Interior lamps
Front
Interior lamp (10 watt bulb) with
reading lamps (10 watt bulbs)
1 Interior lamp: press the lamp out to
the side with a screwdriver and re-
move the lens. Pull the bulb from the
contact tabs.
2 Reading lamp: gently press against
the lamp while turning it to the left to
remove it.
Indirect lighting
1 watt bulb
1 Unclip the lamp holder.
2 Remove the bulb.
Rear
Interior lamp (10 watt bulb) with reading
lamp (5 watt bulb)
1 Use a screwdriver in the upper
recesses to pry the lamp out.
2 Interior lamp: push back the tab on
the reflector and replace the bulb.
3 Reading lamp: gently press against
the lamp while turning it to the left to
remove it.
To Next Page
Loading...
