Index Data Technology Repairs Car care Controls Overview
163n
Repairing a flat tire
The components of the M Mobility
system
1 On/Off switch
2 Connection hose with pressure
gauge for connecting the compressor
with the sealant container or to con-
nect the compressor to the wheel
3 Pressure gauge for indicating the tire
pressure
4 Connector hose from the sealant
container to the wheel
5 Warning sticker for maximum speed
6 Plug and cable for the cigarette
lighter socket
7 Protective gloves (not illustrated).
39mde106
Use the M Mobility System
If possible, leave the foreign
object in the tire.<
Do not exceed the maximum
speed limits described below,
otherwise it could lead to accidents.
Before you use the M Mobility System,
read the warnings and danger notices
on the device carefully.<
1 Remove the warning sticker 5 for
maximum speed that is located on
top of the device and affix it to the
steering wheel.
2 Take off the round cover and take out
hose 4. Unscrew the valve from the
defective wheel and screw the hose
to the valve.
To Next Page
