Fig. 27: Installing Cover Bolts
Courtesy of BMW OF NORTH AMERICA, INC.
Install cover bolts and align cylinder head cover.
Hand-tighten all cover bolts without preload. Tighten cap nuts crosswise from inside to outside.
11 12 100 REMOVING AND INSTALLING/REPLACING CYLINDER HEAD (M52TU / M54 / M56)
Special tools required:
00 0 200
00 9 120
Remove both exhaust manifolds, refer to 11 62 140 REMOVING AND INSTALLING BOTH EXHAUST
MANIFOLDS WITH CATALYTIC CONVERTERS (M52TU / M54 / M56).
NOTE: After removing exhaust manifolds:
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:50 p. m. Page 30 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
