Reinstall engine support arm with engine mount and remove special tool 00 0 200.
Remove intake filter housing with air-mass flow sensor. See 11 61 050 REMOVING AND INSTALLING
INTAKE AIR MANIFOLD (M54).
Remove cylinder head cover, refer to 11 12 000 REMOVING AND INSTALLING, SEALING CYLINDER
HEAD COVER (M52TU / M54 / M56).
Remove all spark plugs. See 12 12 011 REPLACING ALL SPARK PLUGS .
Remove intake air manifold, refer to 11 61 050 REMOVING AND INSTALLING INTAKE AIR
MANIFOLD (M54).
Remove coolant drain plug in engine block. Drain and dispose of coolant.
Replace sealing ring on drain plug.
Tightening torque: 25 N.m.
Vent cooling system and check for leaks, refer to 17 00 039 VENTING COOLING SYSTEM AND
CHECKING FOR LEAKS (M54/M56) .
Remove coolant thermostat housing, refer to 11 53 000 REMOVING AND INSTALLING/REPLACING
COOLANT THERMOSTAT (M52TU / M54 / M56).
Remove coolant pipe.
Release banjo bolt (1) and disconnect oil pressure line for VANOS adjustment unit.
NOTE: If the coolant pipe cannot be fed out:
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:50 p. m. Page 31 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
