Fig. 6: Opening Oil Drain Plug
Courtesy of BMW OF NORTH AMERICA, INC.
When engine oil is drained, open cap in engine underguard.
Open oil drain plug and drain off engine oil.
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ. Refer to ENGINE - TIGHTENING TORQUES .
Complete vehicle and set in horizontal position.
Top up engine oil.
Start engine and run at idle until oil indicator lamp goes out.
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:50 p. m. Page 6 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
