Switch off engine, wait approx. 5 minutes and then check engine oil level.
Top up engine oil if necessary.
Supplementary service:
Refer to vehicle-specific inspection sheet.
11 00 039 CHECKING COMPRESSION OF ALL CYLINDERS (M60 / M62 / M73 / S62 / M54)
Special tools required:
110 224
110 226
Cut off power supply to ignition coils (disconnect plug connection at DME control unit).
Necessary preliminary tasks:
Connect charger or a second battery.
Read out fault memory of DME control unit
Pull fuel pump relay or fuel pump fuse.
Start engine and allow residual fuel to drain out (pressure reduction).
Remove all spark plugs.
Screw special tool 11 0 226 by hand into spark plug thread and connect special tool 11 0 0224.
IMPORTANT: High tension - mortal danger!
IMPORTANT: Check Schrader valve on special tool 11 0 226 for tight fit.
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:50 p. m. Page 7 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
