The MINI Maintenance System display provides the vehicle operator access to the
current status information for the following maintenance service tasks:
Z Engine oil* (date and miles)
Z Vehicle check (date and miles)
Z Front brake pads (miles)
Z Rear brake pads (miles)
Z Brake fluid (date)
For each specific maintenance service task, either the future date (month/year),
remaining miles or both are provided as noted above. The system monitors variable
inputs to forecast the intervals and alert the driver when one or more specific
maintenances tasks should be performed.
NOTE: The status of the front and rear brake pads will only be observable in the
maintenance system’s display when there are approximately 2,000 miles or less
remaining before a brake service will be required to be performed.
For information about the vehicle’s maintenance system displays, please refer to the
Maintenance Service Display Overview section beginning on page 4.
The following “combine with Engine oil” maintenance ser vice tasks may be identified
as needing to be performed with a specific occurrence of the “Engine oil” service task
(service counter number):
Z Cabin Microfilter(s)
Z Engine air filter(s)*
Z Spark plugs*
Although these items do not appear in the MINI Maintenance System’s display in the
vehicle, these ser vices should be performed when your vehicle’s engine oil* is changed
in accordance with the interval identified by your vehicle’s MINI Maintenance System.
For more information on your vehicle’s maintenance services requirements, procedures
and intervals, please refer the Maintenance Service Summary section beginning on
page 8.
The MINI Maintenance System also includes an option to set service reminders for the
following state-specific mandatory vehicle inspections, including:
Z Vehicle safety inspection; and/or
Z Emissions test
The corresponding interval data for these inspections can be inputted into the MINI
Maintenance System by a service provider; they are not determined by the vehicle.
2
To Next Page
Loading...
