Displays in Event of a Fault
The following warnings are displayed if the camera is faulty:
• Check control icon in the instrument cluster
• A symbol/description is also shown in CD or CID
• Check control message in the cluster under the tachometer (E65/E66 only)
Initialization
When replacing the camera, it is always necessary to initialize the software by entering
a clearance code (FSC).
The camera is programmed by means of a control unit. The control unit receives the
programming and coding data for the camera via the K-CAN. The control unit forwards
these data to the camera via the LIN bus.
23
BMW Night Vision
Displays in Event of a Fault (E65/E66) Displays in Event of a Fault (E60/E61/E63/E64)
To Next Page
