Need help?Do you have a question about the BMW R1150RT - MAINTENANCE BMW INTEGRAL ABS and is the answer not in the manual?
General| Displacement | 1130 cc |
|---|---|
| Bore x Stroke | 101 mm x 70.5 mm |
| Compression Ratio | 10.3:1 |
| Cooling | Air/oil-cooled |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 170/60 ZR 17 |
| Maximum Power | 70 kW (95 hp) at 7, 250 rpm |
| Fuel System | Electronic fuel injection |
| Final Drive | Shaft |
| Rear Brakes | Single disc, 276 mm, BMW Integral ABS |
| Wheelbase | 1485 mm (58.5 in) |
Perform ABS bleed test with BMW MoDiTeC.
Procedure to change and bleed brake fluid in wheel circuits.
Procedure to change and bleed brake fluid in control circuits.
Procedures for removing and installing front and rear brake calipers.
Procedures for removing and installing front and rear brake discs.
Procedures for removing and installing front and rear ABS sensors.
Service procedures for footbrake lever and rear master cylinder.
Procedures for removing and installing the ABS pressure modulator.
Procedures for draining the Integral ABS brake system circuits.
Read ABS fault memory and perform bleed test with BMW MoDiTeC.
To Next Page
