Need help?Do you have a question about the BMW R60/6 and is the answer not in the manual?
General| Displacement | 599 cc |
|---|---|
| Bore x Stroke | 73.5 mm x 70.6 mm |
| Final Drive | Shaft drive |
| Front Suspension | Telescopic fork |
| Engine Type | Air-cooled, four-stroke, boxer twin |
| Power Output | 40 hp (29 kW) at 6, 400 rpm |
| Torque | 49 Nm @ 5, 000 rpm |
| Transmission | 5-speed |
| Rear Suspension | Twin shock absorbers |
| Front Brake | Drum brake |
| Rear Brake | Drum brake |
| Fuel Capacity | 17 liters |
| Top Speed | 160 km/h |
Guidelines for the initial break-in period for the motorcycle's components.
Provides crucial safety advice for riding and motorcycle maintenance.
Outlines scheduled maintenance tasks for minor and major services.
Instructions for changing engine oil and replacing the oil filter.
Step-by-step guide for bleeding the motorcycle's brake system.
General advice on carburetor cleaning and basic setting procedures.
Adjusting carburetors for R 60/6 and R 90 S models.
Adjusting carburetors for R 75/6 and R 90/6 models.
Checking and replacing spark plugs, including electrode gap.
Procedures for breaker points, lubricating felt, and timing ignition.
Checking cylinder head nut torque and adjusting valve clearances.
Lists critical nuts and bolts and their specified tightening torques.
Troubleshooting guide for common engine problems and their solutions.
Technical description of the motorcycle's engine components and design.
Technical specifications for the engine across different models.
Specifications for the clutch, gearbox, and final drive ratios.
Maintenance tasks required for the initial service at 1000 km.
Table detailing scheduled maintenance intervals (Minor/Major Service).
Terms and conditions of the manufacturer's warranty.
To Next Page
