12n
Setting the sound quality
Changing the sound setting
1. Call up the sound setting
The display changes to the operating
display for BASS, e.g.:
2. Select a different sound setting
(Treble, Fader or Balance) if neces-
sary
Press repeatedly until the desired
operating display is reached.
3. Change the desired sound setting
Press or hold down until the desired
setting comes up.
Resetting the sound setting
By confirming "TONE LIN" you reset all
sound settings for the current audio
source to the midrange setting.
Bass and treble are reset for the
current audio source, front/back
and right/left volume distribution for all
audio sources.
<
1. Call up operating display for the
midrange setting
Press repeatedly until "TONE LIN"
appears
2.
All settings are reset.
Online Edition for Part No. 01 41 0 155 848 - © 01/01 BMW AG
To Next Page
Loading...
