What to do if BMW Wallbox Pure Automobile Battery Charger shows charging over-current?
If your BMW Automobile Battery Charger indicates a charging over-current, follow these steps: First, interrupt the power supply. Then, have a trained technician check the connections in the Wallbox Pure. After the check, re-establish the power supply. If the error code continues, contact the Wallbox Installation Service.
Why BMW Automobile Battery Charger shows cable connection error?
If your BMW Automobile Battery Charger shows a cable connection error, it is due to cable connection issues. To resolve this: First, interrupt the power supply. Then, a trained technician must check the charging cable connections to the electronics. After the check, re-establish the power supply. If the error code persists, contact the Wallbox Installation Service.
What to do if BMW Automobile Battery Charger has control circuit issues?
If your BMW Automobile Battery Charger is experiencing control circuit issues, follow these steps: First, interrupt the power supply. Then, a trained technician must check the charging cable connections to the electronics. After the check, re-establish the power supply. If the error code persists, contact the Wallbox Installation Service.
How to fix electronics or contactor issues in BMW Wallbox Pure?
To address electronics or contactor issues in your BMW Automobile Battery Charger: First, interrupt the power supply. Then, a trained technician must check the contactor connections. After the check, re-establish the power supply. If the error code persists, contact the Wallbox Installation Service.
General| Brand | BMW |
|---|---|
| Model | Wallbox Pure |
| Category | Automobile Battery Charger |
| Language | English |
Explains the meaning of various symbols used in the manual for warnings and information.
Defines product use and outlines critical safety warnings regarding electric shock and overloading.
Details warranty conditions and requirements for proper installation and operation.
Overview of the Wallbox Pure's ergonomic design and one-handed operation features.
Explains the function of the key locking system for preventing unauthorized use.
Details the functionality of the Stop/Start button and the meaning of LED indicator colors.
A table correlating LED status, key locking system, vehicle connection, and Wallbox Pure state.
Describes the practical use of the lower shelf and upper storage compartment for accessories.
Instructions on how to connect the Wallbox Pure charging cable to the vehicle.
Step-by-step guide to initiate the vehicle charging process using the Wallbox Pure.
Procedure for safely ending a charging session and disconnecting the vehicle.
Explains the Wallbox Pure's self-test procedure upon restarting after a power interruption.
Describes how to identify and interpret error codes indicated by the LED status.
Details specific LED status patterns, their causes, remedies, and notes for troubleshooting.
Guidelines for cleaning the Wallbox Pure exterior and performing monthly safety tests.
Information on adhering to environmental and legal regulations for product disposal.
To Next Page
