Technical data
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features and functions
that are not necessarily available in your vehi-
cle, e.g., due to the selected options or country
versions. This also applies to safety-related
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
General information
The technical data and specifications in the
Owner's Manual are used as guidance values.
Vehicle-specific data may deviate from this, for
instance due to the optional equipment
chosen, national-market version, or country-
specific measuring process. Detailed values
can be found in the approval documents, on
signs on the vehicle or can be obtained from a
dealer’s service center or another qualified
service center or repair shop.
Dimensions
The dimensions can vary depending on the
model version, equipment version or country-
specific measurement procedure.
The height of the vehicle can also differ, e.g.,
due to tires and vehicle load.
BMW X2
Width with mirrors in/mm 82.6/2,098
Width without mirrors in/mm 71.8/1,824
Height in/mm 60.1/1,526
Length in/mm 172.2/4,374
Wheelbase in/mm 105.1/2,670
Smallest turning radius diam. ft/m 37.1/11.3
Seite 286
REFERENCE
Technical data
286
Online Edition for Part no. 01405A540A1 - II/22
To Next Page