to the protruding locking bracket and keep this
area unobstructed.
NOTICE
Vehicle parts can be damaged when folding
down the rear backrest. There is a risk of dam‐
age to property, among other potential dam‐
age. Make sure that the area of movement of
the rear backrest including head restraint is
clear when folding down.
Reclining the backrest
From the rear
Pull the lever and fold the rear seat backrest for‐
ward.
Folding back the backrest
Return the rear seat backrest to the seat position
and engage it.
Folding down the center section
1. Fold down the center head restraint.
2. Pull lever and fold the center section forward.
Cargo position
Principle
The rear seat backrests can be moved into an
upright loading position individually. An adjust‐
ment in several tilt stages is possible as needed.
General information
The backrest tilt for the center section is ad‐
justed together with the left backrest.
Adjusting
1.
Pull the lever and hold it.
2. Move the rear seat backrest into an upright
loading position.
After the adjustment, move the backrest slightly
forward or back to engage it correctly.
Seite 302
CONTROLS
Cargo area
302
Online Edition for Part no. 01405A37CC6 - VI/21
To Next Page
Loading...
