BMW X4 - Validity of the Owners Manual; Production of the Vehicle; At the Time of Production at the Plant, the Printed; Owners Manual Is the most Current Resource

▷ Engine is turned off and sufficiently cooled
down.
▷ Automatic engine start for pre-conditioning is
not activated via iDrive.
If applicable, follow the notes for further prerequi‐
sites on the control display.
If the prerequisites are not met, such as a suffi‐
cient vehicle battery charge state, the upgrade
will not be offered for installation.
Pay attention to an offer for installation, for in‐
stance after extended driving.
Preparing the vehicle
▷ Park the vehicle safely away from the public
road.
▷ Cellular network reception must be ensured
so that a fault message can be sent, for in‐
stance if the installation is terminated.
▷ Close the windows.
▷ Close the glass sunroof.
▷ Close the tailgate.
▷ Remove energy consuming devices, such as
a mobile phone.
▷ The vehicle key must be located in the vehi‐
cle for the consent for installation.
▷ Switch off the exterior lighting.
▷ Remove connected devices from the OBD
socket.
Starting installation
The upgrade can be installed when all prerequi‐
sites have been met.
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Remote Software Upgrade"
5. "Start upgrade now"
Follow the instructions on the Control Dis‐
play.
Functional limitations
During the upgrade, the majority of functions is
temporarily unavailable, for instance:
▷ Hazard warning system.
▷ Central locking system and, if necessary,
Comfort Access.
▷ Parking lights.
▷ Horn.
▷ Alarm system.
▷ Emergency call.
▷ Power windows.
▷ Operation of the tailgate.
▷ Glass sunroof.
▷ Checking the fuel filler flap lock.
The driver's door can be locked and unlocked
from the outside using the integrated key.
After successful upgrade
The vehicle can be used again immediately.
Booked services, such as RTTI or Remote Serv‐
ices, will be reactivated automatically during the
next trip.
After an extended stationary period, charge the
vehicle battery with an extended drive.
Malfunction
In the event of a malfunction, follow the instruc‐
tions on the control display or in the BMW app.
If the malfunction cannot be remedied, contact a
dealer’s service center or another qualified serv‐
ice center or repair shop.
Validity of the Owner's Manual
Production of the vehicle
At the time of production at the plant, the printed
Owner's Manual is the most current resource.
Seite 59
BMW Remote Software Upgrade
CONTROLS
59
Online Edition for Part no. 01405A37CC6 - VI/21