73n
OverviewControlsMaintenanceRepairsDataIndex
To interrupt the cruise control
When the system is activated, press
button 1. The indicator lamp stays on.
You can use the cruise control again
whenever required by calling up the
speed that was stored last.
In addition, the system is automatically
deactivated in response to the following
conditions:
> When you apply pressure to the
brake pedal
> When you apply pressure to the
clutch pedal or when you move the
automatic transmission selector lever
from "Drive" to "Neutral"
> If you exceed or fall below the
controlled speed for an extended
period (by depressing the acceler-
ator, for example).
To recall the stored setting
Press button:
The vehicle accelerates to and main-
tains the last speed stored.
To Next Page
Loading...
