Destination guidance
160
Destination guidance via
voice instructions
Switching voice instructions on/off
Voice instructions can be switched on or off
during destination guidance.
1. "Navigation"
2. "Map"
3. Select the symbol.
For rapid access, the feature can be stored on a
programmable memory button, refer to
page 20.
Repeating a voice instruction
1. "Navigation"
2. "Map"
3. Highlight the symbol.
4. Press the controller twice.
Adjusting the volume of voice
instructions*
The volume can be adjusted only while a voice
instruction is being issued.
1. Repeat the last voice instruction, if neces-
sary.
2. Turn the knob during the voice instruction
to select the desired volume.
The setting is stored for the remote control cur-
rently in use.
Map display
Displaying map view
You can have your current position displayed on
a map. After starting the destination guidance,
the planned route is shown on the map.
1. "Navigation"
2. "Map"
The following functions are directly available in
the map display:
Information in the map view
> Time, entertainment source, sound output,
map orientation
> Distance from destination/intermediate
destination, estimated time of arrival, if des-
tination guidance is active.
> Any traffic obstructions are highlighted in
color.
To show/hide information on the map:
Press the controller.
Symbol Meaning
Voice instructions switched on
Voice instructions switched off
Symbol Function
Starting/stopping destina-
tion guidance
Switching voice instructions
on/off
Changing route criteria or
selecting route alternatives
Special destinations
Displaying traffic bulletins
Interactive map
Map view settings
Changing scale
To Next Page
Loading...
Need help?
General
