BMW XM - Page 211

Safety information
Warning
Depending on the setting, Dynamic Stability
Control may be restricted or not available
when the M1 or M2 button is activated. There
may be a risk of accidents or risk of damage
to property. Note the settings for Dynamic
Stability Control in iDrive and take any nec-
essary action. Modify your driving style and
react, if necessary.
Configuring M1/M2
1.
Press the button.
2. "M1 CONFIGURATION" or "M2
CONFIGURATION"
3. Select the desired setting.
The individual settings are stored for the con-
figuration currently in use.
Alternatively, current system settings can be
directly saved to M1 or M2. To do this, press
and hold the desired button on the steering
wheel until an acoustic signal sounds.
Activating M1/M2
Press the corresponding button on the steering
wheel:
▷
Activate M1.
▷ Activate M2.
"M1 CONFIGURATION" or "M2
CONFIGURATION": If DSC OFF or M Dynamic
Mode is set, a message is displayed on the
instrument cluster. This message is confirmed
by pressing the button again.
Disabling M1/M2
Press the corresponding button on the steering
wheel.
Resetting M1/M2
1. Press the button.
2. "M1 CONFIGURATION" or "M2
CONFIGURATION"
3. "Reset"
4. "Reset M1 settings."
To cancel resetting: "Cancel"
Display in the instrument cluster
Icon Description
Icon illuminates: corresponding
configuration is activated.
Icon illuminates and "Function
cannot currently be activated."
appears: Configuration cannot
be activated due to current
driving situation.
Reactivate configuration when
the lettering is not illuminated.
M MODE
Principle
Driver assistance and collision warning sys-
tems can be adapted to the situation via M
MODE.
The display on the instrument cluster and
the Head-up display view change with the se-
lected drive mode.
Seite 211
Driving stability control systems
CONTROLS
211
Online Edition for Part no. 01405A8A608 - VI/23