BMW XM - Page 240

Depending on the equipment and national-
market version, information for the system is
displayed in the Assisted View in the central
display area of the instrument cluster.
Additional information:
Assisted View, refer to page 154.
System limits
The limits of the Assisted Driving Mode system
apply.
The limits of the Driver Attention Camera sys-
tem also apply to automatic lane changes.
Additional information:
▷ Assisted Driving Mode, refer to page 234.
▷ Driver Attention Camera, refer to page 208.
Assisted Driving Mode Plus
Principle
Assisted Driving Mode Plus provides assis-
tance when driving on highways.
The system increases driving comfort in suita-
ble driving situations.
Sensors in the steering wheel detect whether
the steering wheel is being touched.
Different versions of this function are available
depending on vehicle equipment and national-
market version.
▷
Version for speeds up to approx.
40 mph/60 km/h, e.g., traffic jam.
▷ Version for speeds up to approx.
85 mph/135 km/h.
General information
For versions up to 85 mph/135 km/h, the fol-
lowing applies:
Assisted Driving Mode Plus will be active at the
time of vehicle delivery and will only be avail-
able for a limited period. Information about
the duration of availability for Assisted Driving
Mode Plus will be available prior to and at
the time of vehicle sale. Assisted Driving Mode
Plus may be terminated earlier due to techni-
cal or legal requirements. Further information
about the availability of Assisted Driving Mode
Plus can be requested from an authorized
service center.
Safety information
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Warning
The system is only intended for use on roads
with structural separations such as highways.
Because of the system limits, the system can
also remain active on roads without structural
separations and may not react as expected.
There is a risk of accident. Deactivate the
system if it is enabled on roads without struc-
tural separations.
Federal, state, or local laws may differ, and
the use of this function may be prohibited or
limited. Before use, check federal, state, and
local laws.
The Assisted Driving Mode alerts also apply.
Additional information:
Assisted Driving Mode, refer to page 234.
Seite 240
CONTROLS
Driver assistance systems
240
Online Edition for Part no. 01405A8A608 - VI/23